This automated visual Fiber tensile screening program is made for operator skill impartial utilization in production and laboratory settings. Two basic model configurations enable the user to select between a set up for standard linear Proof screening and with additional mandrels for rotary high strength testing.
The linear edition is made for production Proof screening with forces as much as 22 N. Motor-driven clamps with very carefully designed rubberized inserts ensure that the Fiber Drawing Machine will not be damaged inside the testing procedure while simultaneously getting rid of the necessity for an outside air provide. Amounts of pulling force, tugging speed and hold time are automated and easily available to the operator from the built-in Liquid crystal display touch screen manage. Data from assessments can be stored and reached using the USB port or Ethernet interface.
Mandrels of the identical style like NYFORS’ optical Fiber recoaters can easily be mounted on the Proof tester in the rotary higher strength configuration. The Fiber is covered round the two mandrels which assistance it using a special clamping mechanism. This way higher loads can be applied onto the Fiber, enabling breaking strength tests under managed conditions.
Adjustable clamp placement facilitates testing with all the greatest force amounts as well as screening of brief Fiber lengths. The lightweight and light bodyweight style definitely makes the instrument easy to maneuver in a lab environment as well as incorporate in a creation work bench where space is at reasonably limited. The device is really a lightweight and lightweight instrument perfect for screening the strength of visual fibers up to 30 N. The equipment is developed to meet all types of applications in which a power test must be carried out.
The equipment was created with the consumer in mind. The Optical Fiber Ribbon Machine is definitely positioned in the carefully guided linear clamps, and also the testing begins automatically having a “One Touch” go button. The built in microprocessor regulates each of the important guidelines including tugging force, pulling velocity and hold time. This allows for a totally controlled check every time.
The device can be attached to an outside PC, which enables access to all automated guidelines and configurations. The equipment is adapted to face-alone use or even to the integration into various subsystems. The machine has an substantial capability of logging and saving information such as tugging force, pulling velocity and Fiber size as well as other parameters.
Two recoat injector designs can be purchased. The PTR307 uses a computerized pump to inject the recoat material. The volume of materials dispensed through the automated injector is managed by hand through the top-installed “Inject” button or programmed to the machine using the tablet pc controller. The PTR307B comes with a manual recoat injection system that requires an individual to manually dispense the recoat material to the mold cavity; another one injector for that PTR307B recoater can be obtained listed below. Make sure you note that the automated injector is only appropriate for higher-index recoat materials, as the manual injector is compatible with each low- and high- directory recoat material; both of them are marketed separately listed below. Make sure you get in touch with Tech Support for more information.
he handbook injector can be installed to suitable Fiber recoaters through the 4-40 screws on the recoater real estate (see photo to the right). Make use of a 3/32″ hex key to secure the injector prior to use. To connect the PTRRRM towards the recoater mold, tighten up the connector after the eco-friendly plastic material tubes, then loosen by a 1/4 consider enable rotation.
The injector comes with a distribution device and 2-position choice handle for directing the flow of recoat materials. A knurled dispensing attach with the inner plunger acts as a syringe for that recoat material. To fill the syringe, point the lever downwards (i.e., towards the recoat bottle), then rotate the knurled dispensing screw counterclockwise until it rotates easily to fill the syringe (demonstrated inside the photo towards the right). Then, to inject the recoat material to the mold, point the handle horizontally (i.e., facing qyjflh knurled screw) and spin the attach clockwise until nearby the end in the journey range is achieved. Steer clear of bottoming out your dispenser because this may damage the interior plunger; also take care when re-interesting the threads to prevent cross threading the dispensing attach. A number of fill/inject actions may be required until air is displaced in the system. Use lens tissue and an acetone or alcohol cleaning solution to gather Optical Fiber Ribbon Machine materials that runs from your mold.